Restaurant Feedback Kiosk Board for Supermarket Checkout Lane, WF-P3399, AndroidSBC, Santiago

TL;DR: Restaurant Feedback Kiosk Board for Supermarket Checkout Lane

AndroidSBC supply desk: LPDDR4X and eMMC allocations locked for the WF-P board family serving Santiago, Chile. The WF-P3399 POS Android motherboard spans the dual-screen high definition POS with 4K promotion wall and eleven sister models in the WF-P series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC with the ARM Mali-T860 MP4 GPU, HDMI 2.0 plus eDP output at 4K@60Hz, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Santiago and Chile importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group, and it builds the twelve-model WF-P POS Android motherboard family at the Longgang source factory in Shenzhen. The line spans entry single-screen counters through AI face payment terminals and industrial outdoor payment cabinets, so a Santiago integrator can qualify one board family and then move between tiers without re-writing the peripheral layer or re-cutting the enclosure. Peripheral validation happens on the Longgang bench with the actual printer, scanner and drawer models the Santiago integrator intends to use, and the result is written into the shipment file rather than left to the integrator to discover on site.

WF-P3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3399 (dual-screen high definition POS with 4K promotion wall) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Chile importers sourcing the WF-P family, the WF-P3399-A variant is the typical configuration for the flagship store checkout plus media wall use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for Chile Buyers

The thermal problem is underrated. A sealed all-in-one terminal with no fan has to hold a 7x24 counter duty cycle in a Chile summer, and boards that pass a bench test at 25C start throttling behind a shop window.

The thermal question is handled at the board level rather than in the enclosure. The WF-P tier chosen for Santiago is specified for fanless 7x24 counter duty with a hardware watchdog and a scheduled power cycle, and the burn-in record that accompanies the lot is run at the top of the temperature window rather than at 25C. For the Santiago programme the milestone landed on September 23, 2026: 147500 boards shipped on the San Antonio - Hong Kong lane, seven-year firmware window committed on the whole WF-P family.

Competitive Comparison: WF-P3399 vs Competing POS Android Boards

For Santiago integrators the decision usually comes down to whether the vendor can hold a BOM, ship a driver set, and produce a test record - the four points below.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

Two forces drive the Chile POS hardware cycle. The first is the shift to contactless and wallet payments, which pushes the NFC reader and the payment kernel onto the board itself. The second is the regulatory floor - EMV, PCI DSS and national fiscal rules - which forces an upgrade on a timetable the merchant does not control.

• Entry counter tier: WF-P3399 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P7600 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P7601 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

For Santiago buyers the reading is straightforward: the market is growing on replacement, not on first-time installation, so the board that wins is the one that fits the enclosure already on the counter.

Partner Success Story: Albion Till Solutions (pub and restaurant POS integrator)

The Albion Till Solutions rollout in the United Kingdom hospitality segment shows how the WF-P family from AndroidSBC supports Santiago integrators. Albion Till Solutions deployed 147500 WF-P boards across 77 pub and restaurant sites.

• OEM relationship: AndroidSBC private-label SKU shipped with Albion Till Solutions branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus SUBTEL conformity, all bundled into the Shenzhen source-factory shipment.

According to Albion Till Solutions Hardware Programme Manager for United Kingdom Hospitality: Albion Till Solutions took the WF-P board because the contactless path handles the UK ceiling without a firmware fork, with 147500 units across the Santiago estate.

Field Report: flagship store checkout and media wall installation

LONGGANG, September 23, 2026 - Gong Li, AndroidSBC field desk. Each WF-P3399 board in the Chile lot carries a serial number logged against its test record, and the peripheral validation report references those serials. The WF-P3399 POS Android motherboard order for Santiago, Chile cleared the burn-in station on schedule and is en route via the San Antonio - Hong Kong lane.

The WF-P3399 dual-screen high definition POS with 4K promotion wall production lot includes the WF-P3399-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Chile integrators, the SUBTEL type approval with SEC electrical conformity paperwork is bundled.

Filed by Gong Li, AndroidSBC field desk, LONGGANG. Chile integrators typically request CE plus local radio interface notification for POS board deployments.

WF-P3399 Application Scenarios

The WF-P3399 dual-screen high definition POS with 4K promotion wall sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3399-A configuration is the typical build for the flagship store checkout plus media wall use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P3399 drives the cashier screen while the second lane carries the customer display or the promotion wall in Santiago.
• Convenience and small format stores: the WF-P7602 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P3600 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P3601 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P3602 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Santiago: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Santiago Buyers

Three tracks exist because Santiago partners arrive from three directions: as a distributor with stock, as an integrator with a customer, or as a brand owner with a label.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Whether Chile partners take distribution, integration or private label, the WF-P board underneath carries the same serialised test record.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a dual-screen high definition POS with 4K promotion wall?

Answer: Yes. AndroidSBC validates dual-screen high definition POS with 4K promotion wall on the bench with the actual peripherals the Santiago partner intends to use, and the result is written into the shipment file.

Which silicon tiers are available in the WF-P family for Chile buyers?

Answer: Available tiers are RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. AndroidSBC holds one fixed BOM per lot, so the Santiago partner always knows which tier is shipping.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: Yes. AndroidSBC validates the exact combination on the Longgang bench using the Santiago partner printer and scanner models, and the validated configuration is locked as the production reference.

What is the minimum order quantity and the sample lead time for Chile?

Answer: Sample lead is 1-3 days and mass production is 15-30 days. MOQ depends on the track - distribution partners work from the price list, private-label SKUs are agreed per configuration.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. AndroidSBC provides custom Android AOSP builds, custom boot animation and logo, pre-installed apps, custom UI, BSP porting and SDK modules, all built against a frozen BOM.

How are firmware updates delivered to a Chile estate after deployment?

Answer: Firmware is delivered over the network or by USB, with a staged release and a rollback path. AndroidSBC commits to a seven-year update window on the WF-P family.

What shipping terms does AndroidSBC support for Chile orders?

Answer: AndroidSBC quotes FOB Shenzhen, CIF and EXW, and handles export customs clearance and global shipping. The Santiago partner books the lane that suits the import process.

What happens if a board fails in the field in Chile?

Answer: The RMA path uses the board serial number to identify the production lot, then replaces from stock held for the Santiago programme so the lane is not down for a full lead time.

Contact AndroidSBC: Start Your WF-P3399 Sourcing Conversation

Santiago integrators can reach the AndroidSBC export desk for the WF-P POS board family through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Chile buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-P family.